World of solar applications
Fastening technology in the solar sector from professionals for professionals
Maximum hold and durability: no compromises when mounting your solar system
The perfect solar fastener is crucial for the efficiency and longevity of your solar system. With our stable and precise mounting solution, you can ensure that your solar modules are optimally aligned and receive maximum solar radiation. In addition, a high-quality mounting system helps your solar installation to withstand extreme weather conditions. Discover the wide range of options for the perfect solar fastener and benefit from reliable and efficient energy generation.
Simply safe
Strong hold
REISSER solar fasteners
Hanger bolt
Grub screw with welded hexagon head screw
- One component, therefore no loosening possible in the sealing plane. This ensures permanent tightness.
- Fastener with building authority approval
- Smaller diameter for RSB-A than conventional hanger bolts, resulting in a smaller expansion effect in the wood substructure
Threaded pin with untwisted nut
- An assembly group. The nut can become loose over time and the tightness in the sealing plane decreases as a result.
The REISSER solar fastener is the ideal solution for the simple and safe installation of solar panels on a wide variety of roof constructions. Of course, you will also find the right accessories in our range.
Spherical cap W15/20
For trapezoidal profiles
Spherical cap RD24/40
For corrugated profiles
Umbrella sealing SD
For corrugated profiles
Spherical cap W
For trapezoidal profiles
Spherical cap RD24/40
For corrugated profiles
Umbrella sealing SD
Für Wellprofile
If the solar fasteners are loaded transversely to the profiled sheets, the profiled sheets must be fastened to the substructure at the same height in the neighbouring profiled valleys (bottom chord).
We recommend for sandwich substructure:
RP-TD-P-6,0 ≥ E19
Drilling screw for chip-free screwing of sandwich elements to wooden substructures
We recommend for sandwich substructure:
RP-7K-P ≥ E19
Drilling screw for fastening sandwich profiles to steel coupling purlins or thin-walled steel substructures.
RP-K12-P ≥ E19
Drilling screw for fastening sandwich profiles to thick-walled steel substructures.
We recommend for trapezoidal substructure:
RP-TD-6.0 ≥ E19
Drilling screw for chip-free screwing of aluminium and steel profile sheets to wood substructures.
We recommend for trapezoidal substructure:
RP-K-5.5 x 25 E22
Drilling screw for chip-free screwing of aluminium and steel profile sheets to wood substructures.
Finishing highlight
Solar fasteners for wood-UK
RSB-AFastener with building authority approval.
No loosening of the nut in the sealing plane possible, thus permanent tightness.
Solar fasteners for steel-UK
RSB-ZFastener with building authority approval.
No loosening of the nut in the sealing plane possible, thus permanent tightness.
REISSER thin sheet screw
RP-T2
Durable and tight
MSB multi-solar panel
The REISSER Multisolar sheet, for solar fasteners for connection to shingle roofs such as slate roofs, artificial slate roofs, sheet metal shingle roofs and bitumen shingle roofs.
Thanks to the curvature of the moulded sheet, inflowing water is drained away and the solar fastener is lifted out of the water-bearing level at the same time. This makes the construction rainwater-tight.
1 | Insert the MSB Multisolar sheet between the individual shingle layers above the rafters. |
2 | Pre-drill with high profile drill Ø 5.9 mm through the elevation of the Multisolar sheet into the rafter, total screw-in depth. |
3 | Screw the REISSER solar fastener with sealing washer through the umbrella sealing into the substructure. |
4 | The sealing washer should be in full contact with the umbrella sealing, but not cut into it. |
Multi-solar plate
MSBApproval with REISSER solar fastener
Moulded sheet metal for solar fasteners for connection to shingle roofs such as slate roofs, artificial slate roofs, sheet metal shingle roofs and bitumen shingle roofs.
REISSER thin sheet screw - the ideal fastener in the roof area for fastening aluminium profiles to sheet steel profiles on which a PV or solar system is mounted.
Achieve maximum stability and a secure, building authority-approved connection that saves time and money.
The material is broken up, displaced and not removed as chip waste.
The thin sheet metal tip forms more threads in the displaced material and thus generates high pull-out forces even in thin-walled components.
Verarbeitung
1
During the chipless screwing-in process, both components are first pushed apart.
Component 1 (upper profiled sheet)
Component 2 (lower profiled sheet)
2
Component 1 quickly finds its way to the sealing washer and presses against it. During this pressing process, component 1 slips into the unthreaded part of the screw. At the same time, the thin sheet metal tip penetrates component 2 chip-free and the thread begins to grip there. Component 2 is moved towards component 1 without constraint because the screw in component 1 is turning in the unthreaded part during this process.
3
Thread-free part under the screw head also prevents the sealing washer from being damaged by excessive contact pressure. Screw can be loosened again if necessary.
REISSER DEPTH STOP
PRECISION PAIRED WITH SPEED
Auxiliary tool for precise and reproducible adjustment of the optimum setting depth of screws..
EFFICIENT WORK WITHOUT COMPROMISE
The quick-release chuck enables attachments to be changed particularly easily, quickly and without tools. Whether in lightweight metal construction with sockets or in wood construction with long bits (nominal length 50 mm), this versatile system is ideal for a wide range of applications. Thanks to its universal compatibility, the quick-release chuck also fits into any standard drill chuck on cordless screwdrivers - a real all-rounder for professionals.
The user interface is particularly easy and self-explanatory - ideal for quick use, without the need for time-consuming instruction. The depth stop is adjusted intuitively with a simple turning movement to the left or right. A clearly perceptible click-in function ensures precise adjustment steps of 0.25 mm. This allows
Another advantage of the REISSER depth stop: it noticeably reduces the strain on the wrist. The controlled screwing process eliminates the usual jerky movement when tightening the screw. The result is smoother, more even work - without any sudden jerks. This ergonomic advantage is particularly noticeable during longer assembly jobs: The hand tires more slowly and the risk of overloading or discomfort is significantly minimised.
Our depth stop in practice
Torque with Armin
QUALITY THAT SAVES TIME AND MONEY
PRECISE AND RELIABLE
The REISSER depth stop ensures a consistently precise setting depth of the screw - customised to your specific user. The result: Consistently high installation quality that you can be proud of. The screws are always set exactly right - neither too deep nor too loose.
Damaged sealing washers or incorrectly installed screw connections are now a thing of the past. You can reliably avoid reworking and complaints - for permanently secure, visually clean and technically flawless screw connections.
The predefined setting depth ensures that the screw is not overtightened. This offers several advantages: Firstly, the components are protected from possible damage, and secondly, the risk of leaks is significantly reduced as the sealing washers are not excessively crushed.
Thanks to the optimised process, you can achieve reproducible results much faster than with conventional processing. This not only leads to noticeable time savings, but also reduces your costs - without compromising on quality. The result is a consistently uniform screw joint pattern.
Product variants
Weitere Services rund um das Thema Solar
Entdecken Sie unseren Schraubenfinder und den neuesten Katalog zu unseren Produkten rund um das Thema Solarbefestigung.
More security for your construction project
ETA approval for certified screw connections
The European Technical Assessment ETA is a generally recognised proof of a construction product’s technical suitability within the meaning of the Council Directive of the European Community 89/106/EEC dated 21st December 1988.
An ETA has been issued for our screws DNS plus, HBS, TKS, R2 plus, DRIBO, SPARIBO, UHB, wood connector screw and wood facade screw.
The following components are mandatory for a valid ETA approval of your screw connections:
The European Technical Assessment (ETA) is a generally recognised proof of a construction product’s technical suitability within the meaning of the Construction Products Regulation in the EU member states.
The declaration of performance for a product is the written confirmation of the responsible manufacturer in accordance with the Construction Products Regulation. With this declaration, the manufacturer declares and confirms with binding effect that the product possesses the properties specified in the declaration.
The CE mark on a product’s label is intended to ensure that the correct product with the specified technical characteristics is used based on the information provided. At the same time, it forms the basis for proof of marketability.
General building authority approval (abZ)
The abZ is an official procedure in Germany that ensures that construction products and types of construction comply with the applicable building regulations. The approval is granted by means of an examination and assessment under building law.
"The abZ is the classic national certificate of usability for construction products. It has been issued by the DIBt since 1968. The abZ regulates the building authority-relevant properties of the construction product, its areas of use as well as processing, transport, storage, labelling and confirmation of conformity."
(Source: https://www.dibt.de/de/wir-bieten/zulassungen-etas-und-mehr/abz-abg)
Service authorisations
Find all approvals, certificates, test certificates and user-friendly approval overviews on the links opposite.
Reisser Stories
FAQ: Frequently asked questions about electroplating & surface finishing
Answers to the most important questions about our electroplating processes, coatings and services.
REISSER Electroplating offers a wide range of surface finishing for metal parts:
Electropolishing, pickling + passivation, wet painting of connection elements, chemical nickel plating, galvanizing, RUSPERT® coatings as well as zinc flake systems. All processes are suitable for both small batches and large quantities.
Electroplating processes components for many industrial sectors, including the automotive industry, valve technology, medical technology, pharmaceuticals, mechanical engineering and the fastening industry.
Electropolishing involves electrochemically smoothing stainless steel, resulting in smooth, shiny, burr-free surfaces. The process reduces roughness and ensures hygienic, corrosion-resistant and shiny metal surfaces.
Pickling:
Removes impurities, tarnish and scaling.
Passivation:
Strengthens the natural protective layer of stainless steel and thus increases corrosion resistance - without removing material.
Both are carried out one after the other in separate process steps.
With the REISSER wet paint system, over 25,000 colors (RAL, NCS, etc.) and several quality levels such as matt, glossy or texture are available. Both individual items and series production are possible.
Chemical nickel plating produces extremely uniform, wear-resistant and corrosion-resistant layers - ideal for precise metal parts. The nickel coating is non-porous, non-magnetic, chemically resistant, solderable, food-safe and can be applied in a rack or barrel process.
In electroplating, steel is protected from corrosion by a layer of zinc. Passivation, e.g. blue or thick-film passivation, can further improve corrosion resistance. Stainless steel can also be zinc plated thanks to special pre-treatment.
The RUSPERT® coating is a high-quality corrosion protection system consisting of several layers. It provides reliable protection against weathering, moisture, salt water, fuels and oils. The coating is suitable for screws, nuts, washers, turned parts and stamped parts. Standard colours are black and silver. Also known as zinc flake coating.
Zinc flake systems consist of a base coat and an optional top coat. They offer extremely high corrosion protection and are often used for chassis, structural and connecting parts. Available in silver or black - other colors on request.
Yes.
- Barrel goods are suitable for small parts and bulk goods.
- Rack material is used for large, sensitive or shape-critical components.
Both processes are possible at REISSER.
The contact person for electroplating is Marc Binder. You can find his contact details in the FAQ section.
Yes.
- Barrel goods are suitable for small parts and bulk goods.
- Rack material is used for large, sensitive or shape-critical components.
Both processes are possible at REISSER.
